2200 mm Press section (1384)
Manufacturer: Papcel
Trimmed width on pope reel: 2240 mm
Operating speed of PM: 250 m/min
Drive: 380 V, 50 hZ
On the right side when looking from the headbox
Status: complete without suction press roll, dismantled
Combi press with central roll: 1st press + central roll + 2nd press
Central roll 970 mm, Scapa Rock
1st press: nip three chamber Pick-up roll with PU cover
Felt 12.5 x 2.65 m
Manufactured by Voith
2nd press: nip blind drilled with PU cover
Felt 11.5 x 2.55 m
Manufactured by Voith
Felt stretching: 0.37 kW
Offset press: Upper roll Scapa Rock, bottom rubber roll 90° Sh
Hydrostatic drive 4 kW, Pneumatic felt guide
Description of components of the press section
Suction press roll – 1st press – is not available
Three chamber roll: 95 ° Sh
Cover of roll: rubber
Roll length: 2860 mm
Length of suction area: 2520 mm
Diameter: 850 mm
Lift of drive roll to 3 chamber roll: 23 mm
Air: Q = 40 m3/min
Central press
Length of press roll – cover: 2620 mm
Diameter: 970 mm
Felt: 12500 x 2550 mm
2nd press 95 ° Sh
Cover of roll: rubber
Length of felt: 2600 mm
Diameter: 600 mm
Length of wire Fabric: 4700 mm
Felt: 11500 x 2550 mm
Stretching roll of wire Fabric: diameter 270 mm
Length: 2550 mm
Cover: copper
Guiding rolls of 1st and 2nd press felts
Length of roll: 2700 mm
Diameter: 214 mm
Cover: copper
Gearbox: 2 AP 80-6 0,37 kW, 900 rpm, 380 V, 60 HZ
Suction box of press part
Length: 3160 mm
Slot width: 5 mm
Stretching roll of wire Fabric
Length: 2550 mm
Diameter: 270 mm
Cover: copper
3rd press
Upper press: 2470 mm
Roll diameter: 650 mm
Roll cover: rubber
Rubber hardness: 95° Sh
Guiding rolls of paper
Length of roll: 2530 mm
Roll diameter: 190 mm
Cover: copper
Stretching dehumidifier of felts – electrical and manual
Gearbox: TS 0G0 329-75 L 28
Motor: 2 AP 60 – 6 S
0,37 kW, 900 rpm, 380 V, 50 Hz
Spare rolls
Central press (dia.970×2650)
Suction press roll (1.press 3-chamber roll)
