The machine produces crepe tissue paper from pulp and waste paper.
Range of produced basis weight: from 17 to 50 g / m2
Maximum paper width at Pope reel is 2300 mm
The maximum diameter of the roll at Pope reel is 1250 mm.
The maximum working speed of the paper machine is 400 rpm.
Maximum PM performance:
-for lower basis weight 900 kg / h (speed limit)
-for higher basis weight 1050 kg / hour.
Steam parameters at which this performance is achieved:
– steam pressure 375 kPa
– steam temperature 180 ° С
The approach flow is available. The approach flow consists of two CN10 screens and a three-stage cleaners station.
The machine was completely reconstructed in the nineties by Nelba.
Available are large number of spare parts (guide rolls, wires, felts, reel spools etc.)
The main parameters of PM:
1.Headbox with basis weight lower then 28 g/m2 works as a pressure. For other basis weights as open. Equipped with one defl. roll. Headbox width: 2435 mm
2.Wire part – drive 55 кВт / 1450 rpm.
-wire table
– foils
– three suction boxes with low vacuum and two fans
– wire conditioning system up to 2400 kPa
3. Press part – felt dimension :17 x 2,5 м – felt conditioning system up to 2400 kPa – 4 pcs of one foil felt washer – without vacuum circuit
4. Press roll with blind drilling – width 2500 mm – diameter 600 mm – drive 37 kW / 1400 rpm.
5. Yankee cylinder: new, year of production 2019, width 2550 mm, diameter 2500 mm – drive: 75 kW / 1400 rpm. – creping doctor with oscillations – steam recovery system, parameters identical of Yankees cylinder parameters – motors for heat recovery system fans: blowing: 160 kW / 1400 rpm, exhaust fan: 13 kW / 970 rpm.
6. Afterdrying Cylinder: width 2500 mm, diameter 1500 mm, drive – 22 kW / 1400 rpm. – together with a guide rolls and a drying wire with dimension 11.5 x 2.5 m
7.Pope reel– width 2500 m, diameter 1500 mm – drive 15 kW / 1400 rpm.